SPEC-003

Pack: A_DRAWING Severity: major

Units shown (mm/in) and consistent across drawing

Rule Card

Field	Value
Pack	A_DRAWING — Drawing and Specification Completeness
Title	Units shown (mm/in) and consistent across drawing
Severity	major
Check logic	Deterministic
Applies to	Drawing
Inputs required	drawing_title_block
Fix template	Add or correct drawing specification for explicit, measurable intent.

Short Description

Units shown (mm/in) and consistent across drawing

When It Applies

This rule runs whenever the review is executed because A_DRAWING is an always-on base pack. It targets Drawing.

Evidence Profile

Input	Category
drawing_title_block	Drawing / Spec

References

Reference	Type	Title
REF-GPS-1	standard	ISO 8015:2011 — Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules

Sources

• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json