REF-GPS-1¶
| Field | Value |
|---|---|
| Title | ISO 8015:2011 — Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules |
| Type | standard |
| URL | https://www.iso.org/standard/55979.html |
| Notes | Defines fundamental GPS concepts/principles/rules used for creating and interpreting geometrical product specifications. |
| Linked rules | 7 |
Rules Using This Reference¶
| Rule | Pack | Severity | Title |
|---|---|---|---|
PSTD-024 |
F_OVERLAY |
info | GPS drawings should reference ISO 8015 when ISO GPS rules are intended to apply |
SPEC-002 |
A_DRAWING |
major | GPS fundamentals declared (defaults/interpretation consistent with ISO 8015 framework) |
SPEC-003 |
A_DRAWING |
major | Units shown (mm/in) and consistent across drawing |
SPEC-004 |
A_DRAWING |
major | Projection method shown (1st/3rd angle) if multi-view drawing |
SPEC-005 |
A_DRAWING |
major | Material specified (grade + condition/heat treat if relevant) |
SPEC-008 |
A_DRAWING |
major | “Deburr/break edges” requirement present if sharp edges unacceptable |
SPEC-010 |
A_DRAWING |
major | GD&T frames use valid symbols and datums |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json