REF-THR-228-1¶
| Field | Value |
|---|---|
| Title | ISO 228-1:2000 — Pipe threads where pressure-tight joints are not made on the threads — Dimensions, tolerances and designation |
| Type | standard |
| URL | https://www.iso.org/standard/33652.html |
| Notes | Defines dimensions/tolerances and designation for 'G' (parallel) pipe threads intended for joints where thread flanks do not provide pressure tightness. |
| Linked rules | 3 |
Rules Using This Reference¶
| Rule | Pack | Severity | Title |
|---|---|---|---|
ALPMA-007 |
F_OVERLAY |
major | Pipe-thread designation is explicit for fluid/service interfaces (ISO 228-1 where used) |
PSTD-007 |
F_OVERLAY |
major | Pipe thread callouts must explicitly state ISO 228-1 for G-threads |
PSTD-008 |
F_OVERLAY |
critical | ISO 228-1 pipe threads must be parallel and match designated size |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json