ALPMA-007¶
Pack:
F_OVERLAYSeverity:major
Pipe-thread designation is explicit for fluid/service interfaces (ISO 228-1 where used)
Rule Card¶
| Field | Value |
|---|---|
| Pack | F_OVERLAY — Industry Overlay and Compliance |
| Title | Pipe-thread designation is explicit for fluid/service interfaces (ISO 228-1 where used) |
| Severity | major |
| Check logic | Hybrid |
| Applies to | Compliance overlay |
| Inputs required | thread_callouts, drawing_notes |
| Fix template | Declare thread system and mating/sealing assumptions for service interfaces. |
Short Description¶
Interfaces using G-thread families should declare ISO 228-1 compatible callouts and sealing intent.
When It Applies¶
This rule runs only when an overlay activates F_OVERLAY. It targets Compliance overlay.
Evidence Profile¶
| Input | Category |
|---|---|
thread_callouts |
Drawing / Spec |
drawing_notes |
Drawing / Spec |
References¶
| Reference | Type | Title |
|---|---|---|
REF-THR-228-1 |
standard | ISO 228-1:2000 — Pipe threads where pressure-tight joints are not made on the threads — Dimensions, tolerances and designation |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json