REF-BOOK-DFM-SUCCESS¶
| Field | Value |
|---|---|
| Title | A Definitive Guide to Design for Manufacturing Success |
| Type | book |
| URL | Local PDF library: 06_Technical data/06_Manufacturingbooks/310796791-Definitive-Guide-to-DFM-Success.pdf |
| Notes | Used for the baseline codex rules on tool accessibility, orthogonal milling faces, turned-part slenderness, molded wall uniformity, rib and boss proportions, undercuts, corner radii, and molded hole aspect ratio. Key extracted pages: 16, 20, 25-26, 38-46, 58-60. |
| Linked rules | 10 |
Rules Using This Reference¶
| Rule | Pack | Severity | Title |
|---|---|---|---|
DBC-001 |
G_BASELINE |
major | Keep nominal wall thickness as uniform as practical and taper transitions gradually |
DBC-002 |
G_BASELINE |
major | Avoid sharp internal corners; use generous radii so material and tools can move smoothly |
DBC-003 |
G_BASELINE |
major | Make features reachable in the preferred manufacturing direction |
DBC-004 |
G_BASELINE |
major | Keep turned parts stubby enough to resist deflection during cutting |
DBC-005 |
G_BASELINE |
minor | Keep milled floor-and-wall faces orthogonal when a filleted floor is expected |
DBC-006 |
G_BASELINE |
major | Size molded ribs and bosses from the nominal wall, not from intuition |
DBC-007 |
G_BASELINE |
major | Fillet the base of ribs and bosses so stress and flow do not spike at the root |
DBC-008 |
G_BASELINE |
major | Use draft deliberately on molded pull-direction walls, ribs, and bosses |
DBC-010 |
G_BASELINE |
major | Avoid unnecessary undercuts and side actions when simpler geometry can do the job |
DBC-011 |
G_BASELINE |
major | Keep molded blind holes short enough that the supporting core pin stays stiff |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json