DBC-004¶
Pack:
G_BASELINESeverity:major
Keep turned parts stubby enough to resist deflection during cutting
Rule Card¶
| Field | Value |
|---|---|
| Pack | G_BASELINE — DFM Baseline Codex |
| Title | Keep turned parts stubby enough to resist deflection during cutting |
| Severity | major |
| Check logic | Hybrid |
| Applies to | CAD part |
| Inputs required | part_bounding_box, geometry_features |
| Fix template | Shorten the unsupported span, increase section stiffness, or redesign the route so the feature is not a long slender turning problem. |
Short Description¶
Long slender turned parts bend under cutting load, which hurts accuracy, finish, and safety. Support can help, but the first design move is to avoid excessive length-to-diameter ratio.
When It Applies¶
This rule belongs to G_BASELINE (Shared across multiple manufacturing routes) and targets CAD part.
Evidence Profile¶
| Input | Category |
|---|---|
part_bounding_box |
Geometry |
geometry_features |
Geometry |
References¶
| Reference | Type | Title |
|---|---|---|
REF-BOOK-DFM-SUCCESS |
book | A Definitive Guide to Design for Manufacturing Success |
Compiled Threshold Metadata¶
| Field | Value |
|---|---|
| length_to_min_diameter_max | 8 |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json