REF-BOOK-DFM-INJECTION¶
| Field | Value |
|---|---|
| Title | Design for Manufacturing Analysis: Injection Molding Review Guide |
| Type | book |
| URL | Local PDF library: 06_Technical data/06_Manufacturingbooks/307451948-Dfm-Injection-Molding-Analysis-0614.pdf |
| Notes | Used for the baseline codex rules on draft, side actions, rib and boss wall ratios, shut-off draft, thin tool conditions, EDM risk, weld lines, and warp risk. Key extracted pages: 4-8. |
| Linked rules | 7 |
Rules Using This Reference¶
| Rule | Pack | Severity | Title |
|---|---|---|---|
DBC-001 |
G_BASELINE |
major | Keep nominal wall thickness as uniform as practical and taper transitions gradually |
DBC-002 |
G_BASELINE |
major | Avoid sharp internal corners; use generous radii so material and tools can move smoothly |
DBC-006 |
G_BASELINE |
major | Size molded ribs and bosses from the nominal wall, not from intuition |
DBC-008 |
G_BASELINE |
major | Use draft deliberately on molded pull-direction walls, ribs, and bosses |
DBC-009 |
G_BASELINE |
major | Treat shut-offs and thin tool sections as durability problems, not just geometry details |
DBC-010 |
G_BASELINE |
major | Avoid unnecessary undercuts and side actions when simpler geometry can do the job |
DBC-012 |
G_BASELINE |
minor | Deep narrow features and very sharp mold corners should justify the extra tooling process they force |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json