Quality forms (later phase)¶
Supplier-quality documentation — not the first demo. Use when Marcel asks about EMPB / inspection plans.
← Start here · Phase 1: Release check demo
When to show¶
| Phase | Focus |
|---|---|
| Demo 1 | Drawing + BOM release check |
| Demo 2+ | Inspection plans, EMPB, series reports |
Template pack (Theegarten-branded)¶
| Form | File |
|---|---|
| EMPB / first article | 01_EMPB, TP_EMPB_FirstArticleReport_Template_v1.0.docx |
| Inspection plan | 02_Pruefplan |
| Series inspection | 05_Series_Inspection |
| Document register | Workbook sheet 1 |
Spec: theegarten_pactec_quality_templates.md · Built examples in quality_templates/
Example part¶
ZG-2451-A03 Rev C — drive shaft, 14 characteristics extracted from drawing (demo data in _build_templates.py).
Shows how drawing features map to inspection rows — same idea as downstream QA tools, but RapidDraft’s primary value is before release.
Positioning¶
| RapidDraft (upstream) | QA automation (downstream) |
|---|---|
| Release drawing + BOM quality | EMPB / inspection plan from released drawing |
| Engineering + PLM | Quality department |
If asked about Cerpro: different lifecycle step — see Cerpro comparison (internal).