SPEC-016¶
Pack:
A_DRAWINGSeverity:major
Welds use ISO 2553 symbols (not ambiguous sketches)
Rule Card¶
| Field | Value |
|---|---|
| Pack | A_DRAWING — Drawing and Specification Completeness |
| Title | Welds use ISO 2553 symbols (not ambiguous sketches) |
| Severity | major |
| Check logic | Deterministic |
| Applies to | Drawing, Drawing weld callout |
| Inputs required | weld_symbols, weld_data |
| Fix template | Add or correct drawing specification for explicit, measurable intent. |
Short Description¶
Welds use ISO 2553 symbols (not ambiguous sketches)
When It Applies¶
This rule runs whenever the review is executed because A_DRAWING is an always-on base pack. It targets Drawing, Drawing weld callout.
Evidence Profile¶
| Input | Category |
|---|---|
weld_symbols |
Weld / Fabrication |
weld_data |
Weld / Fabrication |
References¶
| Reference | Type | Title |
|---|---|---|
REF-WLD-1 |
standard | ISO 2553: Weld symbol representation on drawings |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json