WLD-014¶
Pack:
D_WELDSeverity:major
Prefer double-V over single-V when appropriate to balance shrinkage
Rule Card¶
| Field | Value |
|---|---|
| Pack | D_WELD — Weldment and Fabrication DFM |
| Title | Prefer double-V over single-V when appropriate to balance shrinkage |
| Severity | major |
| Check logic | Hybrid |
| Applies to | Weldment |
| Inputs required | weld_data |
| Fix template | Clarify weld callouts and update weld design to reduce distortion and quality risk. |
Short Description¶
Prefer double-V over single-V when appropriate to balance shrinkage
When It Applies¶
This rule runs when the selected or auto-classified manufacturing route activates D_WELD. It targets Weldment.
Evidence Profile¶
| Input | Category |
|---|---|
weld_data |
Weld / Fabrication |
References¶
| Reference | Type | Title |
|---|---|---|
REF-WLD-3 |
guide | TWI guidance: design to minimize weld distortion |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json