SPEC-020

Pack: A_DRAWING Severity: major

Coating/finish type and thickness specified when functional (corrosion, hygiene)

Rule Card

Field	Value
Pack	A_DRAWING — Drawing and Specification Completeness
Title	Coating/finish type and thickness specified when functional (corrosion, hygiene)
Severity	major
Check logic	Deterministic
Applies to	Drawing
Inputs required	drawing_notes
Fix template	Add or correct drawing specification for explicit, measurable intent.

Short Description

Coating/finish type and thickness specified when functional (corrosion, hygiene)

When It Applies

This rule runs whenever the review is executed because A_DRAWING is an always-on base pack. It targets Drawing.

Evidence Profile

Input	Category
drawing_notes	Drawing / Spec

References

Reference	Type	Title
REF-HYG-1	guide	EHEDG Guideline 8 (Doc 8) — Hygienic design principles (guidance)
REF-PED-EU	eu_reg	Directive 2014/68/EU (Pressure Equipment Directive)

Sources

• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json