SPEC-009¶
Pack:
A_DRAWINGSeverity:critical
Critical features have explicit tolerances (don’t rely only on general tolerances)
Rule Card¶
| Field | Value |
|---|---|
| Pack | A_DRAWING — Drawing and Specification Completeness |
| Title | Critical features have explicit tolerances (don’t rely only on general tolerances) |
| Severity | critical |
| Check logic | Deterministic |
| Applies to | Drawing |
| Inputs required | manual_context |
| Fix template | Add or correct drawing specification for explicit, measurable intent. |
Short Description¶
Critical features have explicit tolerances (don’t rely only on general tolerances)
When It Applies¶
This rule runs whenever the review is executed because A_DRAWING is an always-on base pack. It targets Drawing.
Evidence Profile¶
| Input | Category |
|---|---|
manual_context |
Manual context |
References¶
| Reference | Type | Title |
|---|---|---|
REF-GPS-3 |
standard | ISO 2768-1:1989 — General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json