SPEC-001

Pack: A_DRAWING Severity: major

General tolerances declared (ISO 2768-1/-2 or equivalent)

Rule Card

Field	Value
Pack	A_DRAWING — Drawing and Specification Completeness
Title	General tolerances declared (ISO 2768-1/-2 or equivalent)
Severity	major
Check logic	Deterministic
Applies to	Drawing
Inputs required	drawing_title_block, drawing_notes
Fix template	Add or correct drawing specification for explicit, measurable intent.

Short Description

General tolerances declared (ISO 2768-1/-2 or equivalent)

When It Applies

This rule runs whenever the review is executed because A_DRAWING is an always-on base pack. It targets Drawing.

Evidence Profile

Input	Category
drawing_title_block	Drawing / Spec
drawing_notes	Drawing / Spec

References

Reference	Type	Title
REF-GPS-3	standard	ISO 2768-1:1989 — General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
REF-GPS-4	standard	ISO 2768-2:1989 — General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications (withdrawn)

Sources

• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.json
• D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json