Skip to content

PSTD-006

Pack: F_OVERLAY Severity: major

Anodizing callouts must reference ISO 7599 when anodic oxidation is specified

Rule Card

Field Value
Pack F_OVERLAY — Industry Overlay and Compliance
Title Anodizing callouts must reference ISO 7599 when anodic oxidation is specified
Severity major
Check logic Deterministic
Applies to Compliance overlay
Inputs required coating_spec
Fix template Update the surface treatment callout to include ISO 7599 and key coating properties required for the application; align with supplier capability.

Short Description

If anodizing is specified as a controlled surface treatment, the drawing should reference ISO 7599 and state the required coating attributes (e.g., grade/thickness/performance).

When It Applies

This rule runs only when an overlay activates F_OVERLAY. It targets Compliance overlay.

Evidence Profile

Input Category
coating_spec Drawing / Spec

References

Reference Type Title
REF-COAT-7599 standard ISO 7599:2018 — Anodizing of aluminium and its alloys — Method for specifying decorative and protective anodic oxidation coatings on aluminium

Compiled Threshold Metadata

Field Value
compiled_from pilot_deep_research
source_rule_id PILOTSTD-006
source_analysis_mode drawing_spec
source_standard_clause None
source_predicate {'left': 'drawing.surface_treatments.anodizing.references', 'op': 'contains', 'right': 'ISO 7599'}
source_evaluator_hint Parse surface treatment notes; if anodizing is present but ISO 7599 is absent, raise evidence gap.
source_pilot_sets ['SET_A_MECH_ROBOT']
source_evidence_quality official_abstract
source_needs_manual_confirmation True
source_inputs ['drawing.surface_treatments.anodizing.present', 'drawing.surface_treatments.anodizing.references']
compiled_inputs ['coating_spec']
unknown_source_inputs []
compile_status executable_now

Sources

  • D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.json
  • D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.json
  • D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.json
  • D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.json
  • D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.json
  • D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.json
  • D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.json
  • D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json