PSTD-021¶
Pack:
F_OVERLAYSeverity:major
Additive manufacturing drawings must document AM process and key quality parameters when VDI 3405 is applied
Rule Card¶
| Field | Value |
|---|---|
| Pack | F_OVERLAY — Industry Overlay and Compliance |
| Title | Additive manufacturing drawings must document AM process and key quality parameters when VDI 3405 is applied |
| Severity | major |
| Check logic | Deterministic |
| Applies to | Compliance overlay |
| Inputs required | manual_context, drawing_notes |
| Fix template | Add 'VDI 3405' reference and link to the AM process parameter sheet (process type, layer parameters, post-processing, inspection method) in the drawing pack. |
Short Description¶
If a part is produced by additive manufacturing, ensure the drawing/spec includes process identification and quality parameters (as-built expectations) so inspection and acceptance are feasible.
When It Applies¶
This rule runs only when an overlay activates F_OVERLAY. It targets Compliance overlay.
Evidence Profile¶
| Input | Category |
|---|---|
manual_context |
Manual context |
drawing_notes |
Drawing / Spec |
References¶
| Reference | Type | Title |
|---|---|---|
REF-ADD-VDI-3405 |
standard | VDI 3405 — Additive manufacturing processes — Rapid manufacturing (basics, definitions, processes) |
Compiled Threshold Metadata¶
| Field | Value |
|---|---|
| compiled_from | pilot_deep_research |
| source_rule_id | PILOTSTD-021 |
| source_analysis_mode | drawing_spec |
| source_standard_clause | None |
| source_predicate | {'left': 'drawing.manufacturing.notes', 'op': 'contains', 'right': 'VDI 3405'} |
| source_evaluator_hint | Apply when project.manufacturing.process == 'additive'; otherwise suppress. If VDI 3405 is the governing guideline, require reference and parameter list (at least as a linked spec). |
| source_pilot_sets | ['SET_B_FOOD_PILOT'] |
| source_evidence_quality | official_abstract |
| source_needs_manual_confirmation | True |
| source_inputs | ['project.manufacturing.process', 'drawing.manufacturing.notes'] |
| compiled_inputs | ['manual_context', 'drawing_notes'] |
| unknown_source_inputs | [] |
| compile_status | executable_now |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json