PSTD-005¶
Pack:
F_OVERLAYSeverity:major
General tolerance note must be present when ISO 2768-mK is used
Rule Card¶
| Field | Value |
|---|---|
| Pack | F_OVERLAY — Industry Overlay and Compliance |
| Title | General tolerance note must be present when ISO 2768-mK is used |
| Severity | major |
| Check logic | Deterministic |
| Applies to | Compliance overlay |
| Inputs required | drawing_title_block |
| Fix template | Add to title block: 'General tolerances ISO 2768-mK' (and, if referencing ISO 2768-2, add ':1989' or adopt ISO 22081 explicitly). |
Short Description¶
Ensures the drawing explicitly states the default general tolerance class ISO 2768-mK so suppliers do not apply unspecified shop defaults.
When It Applies¶
This rule runs only when an overlay activates F_OVERLAY. It targets Compliance overlay.
Evidence Profile¶
| Input | Category |
|---|---|
drawing_title_block |
Drawing / Spec |
References¶
| Reference | Type | Title |
|---|---|---|
REF-TOL-2768-MK |
standard | ISO 2768 (general tolerances) — drawing notation ISO 2768-mK (ISO 2768-1 class m + ISO 2768-2 class K; legacy because ISO 2768-2 is withdrawn) |
Compiled Threshold Metadata¶
| Field | Value |
|---|---|
| compiled_from | pilot_deep_research |
| source_rule_id | PILOTSTD-005 |
| source_analysis_mode | drawing_spec |
| source_standard_clause | None |
| source_predicate | {'left': 'drawing.title_block.general_tolerance_note', 'op': 'contains', 'right': 'ISO 2768-mK'} |
| source_evaluator_hint | Also recommend explicitly dating any ISO 2768-2 reference component because ISO 2768-2 is withdrawn; treat undated references as needing manual review. |
| source_pilot_sets | ['SET_A_MECH_ROBOT'] |
| source_evidence_quality | official_abstract |
| source_needs_manual_confirmation | True |
| source_inputs | ['drawing.title_block.general_tolerance_note'] |
| compiled_inputs | ['drawing_title_block'] |
| unknown_source_inputs | [] |
| compile_status | executable_now |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json