LAB-005¶
Pack:
F_OVERLAYSeverity:critical
Electrical safety constraints impact enclosure/clearances (tie to enclosure CAD checks)
Rule Card¶
| Field | Value |
|---|---|
| Pack | F_OVERLAY — Industry Overlay and Compliance |
| Title | Electrical safety constraints impact enclosure/clearances (tie to enclosure CAD checks) |
| Severity | critical |
| Check logic | LLM-assisted |
| Applies to | Compliance overlay |
| Inputs required | geometry_features, enclosure_geometry |
| Fix template | Add required compliance evidence and overlay-specific controls. |
Short Description¶
Electrical safety constraints impact enclosure/clearances (tie to enclosure CAD checks). How to “use this” with a vision model (without pretending screenshots give real 3D DFM) You can reliably do two kinds of checks with vision: 1. Drawing/spec compliance (
When It Applies¶
This rule runs only when an overlay activates F_OVERLAY. It targets Compliance overlay.
Evidence Profile¶
| Input | Category |
|---|---|
geometry_features |
Geometry |
enclosure_geometry |
Geometry |
References¶
| Reference | Type | Title |
|---|---|---|
REF-LAB-IEC |
standard | IEC 61010-1: Safety requirements for measurement/control/lab equipment |
Sources¶
D:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\manifest.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\rule_library.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\references.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\process_classifier.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\overlays.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\roles.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\report_templates.jsonD:\02_Code\36_RapidDraft_DFMBenchmark_ExpertMode\server\dfm\ui_bindings.json